Cara Install Squid Proxy Server Di Windows XP Bag.2

“cachemgr.conf.default” menjadi ”cachemgr.conf”
“mime.conf.default” menjadi “mime.conf”, dan
“squid.conf.default” menjadi “squid.conf”

Setelah ketiga file diatas dirubah namanya, sobat hanya akan edit satu file saja yaitu file “squid.conf”, buka file “squid.conf” menggunakan notepad atau wordpad.

* Gunakan find (Ctrl+F), ketik “TAG: http_port”, pastikan nilainya 3128. bisa juga dirubah ke nilai lain tapi untuk sekarang biarkan saja 3128. pastikan barisnya sama dengan “http_port 3128”, jangan lupa buang tanda “#”

# Squid normally listens to port 3128
http_port 3128
* Cari “TAG: visible_hostname”, kurang lebih isinya sebagai berikut
# TAG: visible_hostname
# If you want to present a special hostname in error messages, etc,
# define this. Otherwise, the return value of gethostname()
# will be used. If you have multiple caches in a cluster and
# get errors about IP-forwarding you must set them to have individual
# names with this setting.
#
#Default:
# none

tambahkan baris “visible_hostname localhost” dibawah “#none”, sehingga menjadi

# TAG: visible_hostname
# If you want to present a special hostname in error messages, etc,
# define this. Otherwise, the return value of gethostname()
# will be used. If you have multiple caches in a cluster and
# get errors about IP-forwarding you must set them to have individual
# names with this setting.
#
#Default:
# none

visible_hostname localhost

* Cari kata “our_networks”
#acl our_networks src 192.168.1.0/24 192.168.2.0/24
#http_access allow our_networks

di edit, dan hilangkan tand “#” dan sesuaikan dengan alamat jaringan sobat ditambah dengan localhost, sehingga menjadi

acl our_networks src 192.168.1.0/24
http_access allow localhost
http_access allow our_networks

* Cari “TAG: dns_nameservers”
# TAG: dns_nameservers
# Use this if you want to specify a list of DNS name servers
# (IP addresses) to use instead of those given in your
# /etc/resolv.conf file.
# On Windows platforms, if no value is specified here or in
# the /etc/resolv.conf file, the list of DNS name servers are
# taken from the Windows registry, both static and dynamic DHCP
# configurations are supported.
#
# Example: dns_nameservers 10.0.0.1 192.172.0.4
#
#Default:
# none

# TAG: dns_nameservers
# Use this if you want to specify a list of DNS name servers
# (IP addresses) to use instead of those given in your
# /etc/resolv.conf file.
# On Windows platforms, if no value is specified here or in
# the /etc/resolv.conf file, the list of DNS name servers are
# taken from the Windows registry, both static and dynamic DHCP
# configurations are supported.
#
# Example: dns_nameservers 10.0.0.1 192.172.0.4
#
#Default:
# none
dns_nameservers 202.134.0.62 202.134.0.155

Simpan file "squid.conf", buka command prompt kemudian masuk ke direktori “c:\squidsbin” dengan cara mengetikkan “cd c:\squidsbin”, didalamnya ada file squid.exe, untuk pertama kali jalankan squid dengan option –z. Ketik :

>squid -z
Output:
2007/04/23 18:31:13| Creating Swap Directories

Command diatas berfungsi untuk inisialisasi cache squid, setelah itu ketikkan

>squid -d 1 -D

option “-d 1” digunakan untuk masuk ke debug level (untuk diagnosa saja) dan option “-D” digunakan untuk membypass pengecekan DNS, berguna jika anda belum terkoneksi ke internet. kalau sukses outputnya kurang lebih seperti ini :

2007/04/23 18:31:31| Starting Squid Cache version 2.6.STABLE18 for i686-pc-winnt
…
2007/04/23 18:31:31| Running on Windows XP
2007/04/23 18:31:31| Process ID 3616
2007/04/23 18:31:31| With 2048 file descriptors available
2007/04/23 18:31:31| With 512 CRT stdio descriptors available
2007/04/23 18:31:31| Windows sockets initialized
2007/04/23 18:31:31| Using select for the IO loop
2007/04/23 18:31:31| DNS Socket created at 0.0.0.0, port 1054, FD 4
2007/04/23 18:31:31| Adding nameserver 202.134.0.62 from squid.conf
2007/04/23 18:31:31| Adding nameserver 202.134.0.155 from squid.conf
2007/04/23 18:31:31| User-Agent logging is disabled.
2007/04/23 18:31:31| Referer logging is disabled.
2007/04/23 18:31:31| Unlinkd pipe opened on FD 7
2007/04/23 18:31:31| Swap maxSize 102400 KB, estimated 7876 objects
2007/04/23 18:31:31| Target number of buckets: 393
2007/04/23 18:31:31| Using 8192 Store buckets
2007/04/23 18:31:31| Max Mem size: 8192 KB
2007/04/23 18:31:31| Max Swap size: 102400 KB
2007/04/23 18:31:31| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2007/04/23 18:31:31| Rebuilding storage in c:/squid/var/cache (DIRTY)
2007/04/23 18:31:31| Using Least Load store dir selection
2007/04/23 18:31:31| Set Current Directory to c:/squid/var/cache
2007/04/23 18:31:31| Loaded Icons.
2007/04/23 18:31:31| Accepting proxy HTTP connections at 0.0.0.0, port 3128, FD 12.
2007/04/23 18:31:31| Accepting ICP messages at 0.0.0.0, port 3130, FD 13.
2007/04/23 18:31:31| Accepting HTCP messages on port 4827, FD 14.
2007/04/23 18:31:31| Accepting SNMP messages on port 3401, FD 15.
2007/04/23 18:31:31| Ready to serve requests.
2007/04/23 18:31:31| Done scanning c:/squid/var/cache (0 entries)
2007/04/23 18:31:31| Finished rebuilding storage from disk.
2007/04/23 18:31:31| 0 Entries scanned
2007/04/23 18:31:31| 0 Invalid entries.
2007/04/23 18:31:31| 0 With invalid flags.
2007/04/23 18:31:31| 0 Objects loaded.
2007/04/23 18:31:31| 0 Objects expired.
2007/04/23 18:31:31| 0 Objects cancelled.
2007/04/23 18:31:31| 0 Duplicate URLs purged.
2007/04/23 18:31:31| 0 Swapfile clashes avoided.
2007/04/23 18:31:31| Took 0.6 seconds ( 0.0 objects/sec).
2007/04/23 18:31:31| Beginning Validation Procedure
2007/04/23 18:31:31| Completed Validation Procedure
2007/04/23 18:31:31| Validated 0 Entries
2007/04/23 18:31:31| store_swap_size = 0k
2007/04/23 18:31:32| storeLateRelease: released 0 objects
Tekan Ctrl+C

setelah yakin squid jalan, sobat tinggal masukkan squid ke service windows dengan cara

>squid -i
Output :

Registry stored HKLMSOFTWAREGNUSquid2.6SquidConfigFile value c:/squid/etc/ squid.conf

Squid Cache version 2.6.STABLE12 for i686-pc-winnt
installed successfully as Squid Windows System Service.
To run, start it from the Services Applet of Control Panel.
Don’t forget to edit squid.conf before starting it.

Dan Lanjutkan dengan mengetikkan

>squid -O -D
Output :
Registry stored HKLMSOFTWAREGNUSquid2.6SquidCommandLine value -D

command diatas untuk memasukkan parameter -D ketika service dijalankan

Start service pertama kali, masuk ke control panel >> administrative tools >> services, cari service dengan nama “squid”, klik kanan > start.

Konfigurasi di client/PC tinggal masukkan saja alamat proxy (alamat dimana squid diinstall) dan portnya 3128.

Jangan lupa mematikan Windows Firewall, klik Start menu >> Settings >> Control Panel >> Windows Firewall >> di tab General pilih option Off >> OK, atau jika Anda ingin tetap menjalankan firewall maka biarkan firewall tetap On >> di tab Exeptions klik Add Port >> isikan kolom Name dengan squid dan Port Number dengan 3128, TCP >> OK.

Kemudian buka Web Browser:

• Untuk Mozilla Firefox 2.0 dst, klik Tools >> Options >> Advanced >> Network >> Setting >> pilih Manual proxy configuration: HTTP Proxy: localhost Port:3128, kemudian beri tanda check “?” pada Use this proxy server for all protocols, kosongkan kolom No proxy for: >> OK. Sebaiknya Firefox di set untuk tidak menyimpan content atau history browser, caranya klik Tools >> Options >> Privacy >> beri tanda check “?” pada Always clear my private data when I close Firefox, klik Settings…>> beri tanda check “?” pada semua check box yang ada>> OK, kemudian buang tanda check “?” pada Ask me before clearing private data >> OK.

Ok sampai disini squid sobat dah bisa berjalan, bagi para sobat blogger yang lebih paham mengenai squid tolong masukannya. SELAMAT MENCOBA.

Tweet